Reolink RLK8-500V4 Schnellstartanleitung Seite 5

DC Power
Network (LAN)
3
Connect cameras to PoE ports on the NVR via Ethernet cable.
4
Connect the NVR to a power outlet and turn on power switch.
7 English
Set up the NVR System
A setup wizard will guide you through the NVR system configuration
process. Please set a password for your NVR (for the initial access) and
follow the wizard to configure the system.
NOTE: The password should be at least 6 characters. It is recommended
that you note down the password and keep it in a secure place.
Access the System via Smartphone or PC
Download and launch the Reolink App or Client software and follow the
instructions to access the NVR.
• On Smartphone
Scan to download the Reolink App.
• On PC
8
English