Reolink RLK8-500V4 Schnellstartanleitung Seite 7

4
5
11 English
Adjust the camera's viewing
angle as needed.
Attach the dome cover to the
camera base by tightening the
screws.
NOTE: Remove the protective film
from the dome cover after the
installation.
Troubleshooting
No Video Output on the Monitor/TV
If there's no video output on the monitor from Reolink NVR, please try
the following solutions:
• TV/monitor resolution should be at least 720p or above.
• Make sure your NVR is powered on.
• Double check the HDMI/VGA connection, or swap another cable or-
monitor to test.
If it still doesn't work, please contact Reolink Support.
Failed to Access the PoE NVR Locally
If you failed to access the PoE NVR locally via mobile phone or PC, please
try the following solutions:
• Connect the NVR (LAN port) to your router with a network cable.
• Swap another Ethernet cable or plug theNVR to other ports on the router.
• Go to Menu -> System -> Maintenance and restore all settings.
If it still doesn't work, please contact Reolink Support.
English 12