Herunterladen Diese Seite drucken

Reolink RLK8-500V4 Schnellstartanleitung Seite 8

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 10
Failed to Access the PoE NVR Remotely
If you failed to access the PoE NVR remotely via mobile phone or PC,
please try the following resolutions:
• Make sure you can locally access this NVR system.
• Go to NVR Menu -> Network -> Network > Advanced and make sure
that UID Enable is selected.
• Please connect your phone or PC under the same network (LAN) of
your NVR and see if you can visit any website to verify whether there is
Internet access available.
• Please reboot your NVR and router and try again.
If it still doesn't work, please contact Reolink
Specification
NVR
Operating Temperature: -10°C to 45°C
Size:255 x 41 x 230mm
Weight: 1.4kg
Camera
Operating Temperature: -10°C to 55°C (14°F to 131°F)
Size:570g
Weight: Ф 117x86 mm
13
English
Support.
Notification of Compliance
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the lim-
its for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to ra-
dio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• To maintain compliance with FCC's RF Exposure guidelines, This equip-
ment should be installed and operated with minimum distance between
20cm the radiator your body: Use only the supplied antenna.
English
14

Werbung

loading

Diese Anleitung auch für:

Rlk8-800v4Rlk8-1200v4