Noise And Vibrations Levels - Walter R7237B-F Bedienungsanleitung

Noise and vibrations
levels
Noise emissions
Tested according to EN 60745. The noise level
at the workplace may exceed 85 dB (A); safety
precautions are required for the operator in this
case (wear suitable hearing protection device).
Sound pressure level: L
Sound power level: L
Instability: K
pA /
Vibration details
Tested according to EN 60745.
Vibration level: a
Instability: K
The overall vibration value and the noise emission
value specified have been measured according to
a standardized test method and can be used to
compare one power tool with another.
The overall vibration value and the noise emission
value specified can also be used for a preliminary
estimation of the load.
WARNING!
The vibration and noise emissions during
the actual use of the power tool may differ
from the specified values, depending on
the manner in which the power tool is
used, especially, the type of workpiece
being machined
- Is the product well-maintained and in good
condition
- How, and for what material, will the product
be used.
- The use of proper accessories, and whether
these are in good condition.
- Is the product held tightly by the user.
- Is the product operated properly as described
in this manual
630607_Buch_DE_EN_FR_CZ_SI.indb 35 630607_Buch_DE_EN_FR_CZ_SI.indb 35
84 dB(A)
pA
95 dB(A)
wA
K 3 dB(A)
wA
2
3.03 m/s
h,DS
1.5 m/s 2
- If the product is used improperly or excessively
it can cause vibration-related illness
WARNING!
Safety measures have to be defined to
protect the operator based on an estimate
of the vibration load during actual usage
conditions (in this case all the parts of the
operating cycle have to be considered, such
as times when the power tool is turned off,
and those where, the tool is turned on, but
is running without load).
Depending on the way the tool is used and
the operating conditions, the following
safety precautions have to be taken for the
safety of the operator:
- Try to avoid exposure to vibration as much as
possible.
- Only use proper accessories.
- Wear anti-vibration gloves when using the
product.
- Follow the instructions on maintenance and
care given in this product manual.
- Avoid using the product at temperatures below
10°C and over 40°C.
- Plan your work in such a way so that you do not
have to use vibrating tools over several days.

Noise and vibrations levels

35
28.06.2021 09:49:18 28.06.2021 09:49:18