Walter R7237B-F Bedienungsanleitung Seite 21

2) Electrical safety
a) The power tool's mains plug must fit
the socket. Never modify the plug in
any way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid bodily contact with earthed
objects such as pipes, radiators, ovens
and refrigerators. There is an increased
risk of electric shock when your body is
earthed.
c) Keep power tools out of rain and wet
environments. Water entering a power
tool will increase the risk of electric
shock.
d) Do not use the cable for purposes
for which it is not intended, such as
carrying or hanging up the power tool,
and do not pull the cable to disconnect
the tool from the mains. Protect the
cable from heat, oil, sharp edges and
moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for
outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric
shock.
f) If the use of your power tool in a damp
environment is unavoidable, use a
residual current protection device.
Using a residual current protection
device reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing
and use common sense when operating
a power tool. Do not use a power
tool while you are tired or under
the influence of drugs, alcohol or
medication. A moment of carelessness
when using the power tool can result in
serious injury.
b) Wear personal protective equipment
and always use safety goggles.
630607_Buch_DE_EN_FR_CZ_SI.indb 25 630607_Buch_DE_EN_FR_CZ_SI.indb 25
Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or
hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional start-up. Ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying
the tool. Accidents may occur if you keep
your finger on the switch while carrying
the tool or if you connect the power tool
to the power supply when the tool is
switched on.
d) Remove any adjusting tools or keys
before you switch the power tool on. A
tool or a key left in a rotating part may
result in injuries.
e) Avoid working with your body in
an unusual position. Ensure proper
footing and balance at all times. This
enables better control of the power tool
in unexpected situations.
f) Wear appropriate clothing. Do not wear
loose clothing or jewellery. Keep your
hair, clothing and gloves away from
moving parts. Loose clothes, jewellery
or long hair can be caught in moving
parts.
g) If dust extraction or collection devices
can be fitted, ensure that these are
connected and correctly operated. Use
of dust collector can reduce dust-related
hazards.
4) Power tool use and care
a) Do not overload the device. Use power
tools that are intended for your work.
The correct power tool will do the job
better and safer at the rate for which it
was designed.
b) Do not use the power tool if the
switch is faulty. A power tool which
can no longer be switched on and off is
dangerous and has to be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from
Safety
25
28.06.2021 09:49:17 28.06.2021 09:49:17