Safety Instructions For All Applications - Walter R7237B-F Bedienungsanleitung

Safety
the power tool before making any
adjustments, changing accessories, or
storing power tools. This precautionary
measure prevents the power tool from
starting unintentionally.
d) Store power tools out of the reach of
children when not in use. do not allow
persons unfamiliar with the power tool
or these instructions to operate the
power tool. Power tools are dangerous in
the hands of untrained users.
e) Maintain the power tools carefully.
Ensure the moving parts are
functioning correctly and do not
getting stuck. Check if parts are
broken or so badly damaged that the
power tool's functions are impaired.
If damaged, have the device repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
g) Use your power tool, accessories
and bits or tools according to these
instructions. Take into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5) Service
a) Have your power tool repaired only
by qualified personnel and only with
original spare parts. This ensures that
the device is always safe to operate.
Safety instructions for all
applications
Common safety instructions for sanding:
a) This power tool is designed for use as
a sander. Read all safety warnings,
instructions, illustrations and
specifications provided with this power
26
630607_Buch_DE_EN_FR_CZ_SI.indb 26 630607_Buch_DE_EN_FR_CZ_SI.indb 26
tool. Failure to follow all instructions
listed below may result in electric shock,
fire and/or serious injury.
b) This power tool is not suitable for
grinding, working with wire brushes,
polishing and cutting. Using the
power tool for other purposes than it
is designed for can cause danger and
injuries.
c) Do not use accessories which are not
specifically designed and recommended
by the tool manufacturer.l. Just because
the accessory can be attached to your
power tool, it does not assure safe
operation.
d) The permissible speed of the tool has to
be at least equal to the maximum speed
specified on the power tool. Accessories
running faster than their rated speed can
break and fly apart.
e) Outer diameter and thickness of the
tool have to match the dimensional
specifications of your power tool.
Incorrectly sized accessories cannot be
adequately guarded or controlled.
f) Tool bits with threaded insert have
to exactly match the threads of the
grinding spindle. Tool bits that are not
fixed properly to the power tool will
rotate unevenly, vibrate excessively and
may cause loss of control.
g) Do not use damaged tool bits. Before
each use inspect the accessory such as
abrasive wheels for chips and cracks,
backing pads for cracks, tear or excess
wear, wire brushes for loose or cracked
wires. If power tool or application tool
(planer blade) is dropped, inspect
for damage or install an undamaged
application tool. After inspecting
and installing the tool bit, position
yourself and bystanders away from the
plane of the rotating tool and run the
power tool at maximum no-load speed
for 1 minute. Damaged accessories will
28.06.2021 09:49:17 28.06.2021 09:49:17