Miele PWM 509 Bedienungsanleitung Seite 121

Mop
To prevent coarse soiling in the machine, shake out the mops before putting them in.

Standard mops
Fabric
Programme se-
quence
Extras
Standard mops + rtu
Fabric
Programme se-
quence
Extras
60 °C (Cold to 90 °C)
Cotton, viscose, polyester and microfibre mops
Pre-spin
Pre-rinse bath
2nd pre-rinse bath can be activated via extra  "Pre-
rinse"
Main wash up to 90 °C, wash time 6 min
Cool down can be activated in the Miele Benchmark
Programming Tool
2 rinse cycles
Final spin
Pre-rinse, Soak, Water plus, Intensive, Rinse plus, Fill
stop, Rinse hold
60 °C (Cold to 90 °C)
Cotton, viscose, polyester and microfibre mops
Same programme sequence as Mops standard
then set the residual moisture via the extra " – "
(moist, damp, wet, dripping wet)
The pre-set residual moisture is 2 drops (damp)
Pre-rinse, Soak, Water plus, Intensive, Rinse plus, Fill
stop, Rinse hold
en - Programme summary
Load ratio/load size
PWM 509 – 9 kg
PWM 511 – 11 kg
"Mops load size"
1:9
For number,
see
chart
121