Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
If pressed 3 times, air cooler will stop operating after 3 hours.
•
If pressed 4 times, air cooler will stop operating after 4 hours.
•
If pressed 5 times, air cooler will stop operating after 5 hours.
•
If pressed 6 times, air cooler will stop operating after 6 hours.
•
If pressed 7 times, air cooler will stop operating after 7 hours.
•
If pressed 8 times, air cooler will stop operating after 12 hours.
5. "COOL"
•
If pressed once, "COOL" function activates.
6. "SWING"
•
If pressed once, "SWING" function activates and blades stat oscillating.
7. "ION"
•
If pressed once, "ION" function activates.
Heating function
Drag the Cooling and Heating selector downwards, located on the side part of the product, and
take it to the "Heating" position. During "Heating" mode, fan only works at a steady medium
speed. Speed cannot be selected.
1. "ON/OFF"
•
Press once to activate "HEAT I" function.
•
If pressed twice, air cooler will stop after operating 30 seconds at medium speed.
2. "MODE"
•
Press once to activate "HEAT II" function.
•
If pressed twice, air cooler stops heating.
•
If pressed 3 times, "HEAT I" function will activate and air cooler will heat at low speed.
5. CLEANING AND MAINTENANCE
1. Clean air filter
Unplug the appliance from the power supply and pull from the dust filter bracket in order to
take it out. Clean air filter using a neutral cleaning
product and a soft brush, then, clean it with
water.
2. Clean wet filter
Take wet filter out. Clean with soft brush, water
and cleaning product. Then, put it back in the
appliance together with air filter.
Warning: in order to avoid leak, wet filter must be
properly installed.
FORCESILENCE PURETECH 6500
ENGLISH
15
Werbung
