Setting Compression Damping On The Fox 36 & 34 Forks; Setting Rebound Damping On The Fox 36 & 34 Forks - Pivot Cycles Shuttle Sl Bedienungsanleitung

Setting Compression Damping on the Fox 36 GRIP 2 Fork
• To set compression, start from the open (or fastest) position by turning the black (LSC) dial &
(HSC) dial counter-clockwise until they stop clicking.
• A good starting point for most riders is to turn the black (LSC) dial clockwise 5 clicks & turn the
blue (HSC) dial clockwise 2 clicks.
• The recommended starting points may need to be adjusted based on rider weight. Lighter riders
may prefer less compression damping (fewer clicks from open).
Setting Compression Damping on the Fox 36 GRIP Fork
• We always start with the lever in the full open position. Most riders will not need to make any changes
from this position.
• However, if you do need more compression support, the lever will provide a low speed compression
adjustment until the lever is turned halfway.
• The second half of the lever adjustment affects the high speed compression circuit. Of course, fully closed
provides a nearly locked out feel for climbing.
Setting Compression Damping on the Fox 34
• The Fit 4 damper features a
open, medium, and firm.
• The black inner dial adjusts the low speed compression damping that affects the firmness of the
suspension (compression damping) in the fully open position. We set compression from the most
open or fastest position, so start by turning the black compression inner dial counter-clockwise
all the way out.
• Turn black dial clockwise in 2-8 clicks in (depending on rider weight). Most riders should feel
comfortable with 5 clicks in as a starting point. A rider under 120lbs would start with 2 clicks in.
Setting Rebound Damping on Fox Forks
• Start from the open (or fastest) position by turning the
fork leg counter-clockwise until it stops clicking. On the Fox 36 these dial(s) are found under a protective
cover.
• Refer to the chart below for the recommended settings when setting rebound. Fox clicks are in
parentheses.
RIDER
WEIGHT
120-130 [lbs]
130-140 [lbs]
140-150 [lbs]
150-160 [lbs]
160-170 [lbs]
170-180 [lbs]
180-190 [lbs]
190-200 [lbs]
200-210 [lbs]
210-220 [lbs]
220-230 [lbs]
230-240 [lbs]
240-250 [lbs]
www.pivotcycles.com
blue 3 position compression adjustment lever. These settings are
FOX 36 SUGGESTED REBOUND
LSR / HSR
*HSR not available on all builds
3 / Open (12 / 10)
4 / Open (11 / 10)
5 / 1 (10 / 9)
6 / 2 (9 / 8)
7 / 3
(8 / 7)
8 / 4
(7 / 6)
8 / 4 (7 / 6)
9 / 5 (6 / 5)
9 / 5 (6 / 5)
10 / 6 (5 / 4)
11 / 7
(4 / 3)
11 / 7
(4 / 3)
12 / 8
(3 / 2)
Clicks from OPEN (Clicks from CLOSED)
info@pivotcycles.com
red rebound dial(s) on the bottom of the right
FOX 34 SUGGESTED REBOUND
LSR Only
Open (14)
1 (13)
2 (12)
3 (11)
5
(9)
6
(8)
7 (7)
8 (6)
9 (5)
10 (4)
11 (3)
12 (2)
13
BIKE SET-UP
blue
GRIP2 Compression
GRIP Compression Knob
FIT4 Compression Knob
& Open Mode Adjust
HSR
LSR
Protective Cover
(1)
1.877.857.4868
Knob
5