Page EN-24
Operation
2. Turn the adjustment dial (19) until the in-
dicator
appears on the display.
200
The bar at the bottom of the display will move
to the right.
3. Press the "Start/+30sec./Confirm" but-
ton (18).
The indicators will no longer flash.
4. Press the "Start/+30sec./Confirm" button
again.
5. Preheating starts. The indicator
the bar at the bottom of the display will
flash.
During preheating, all bars will start to illu-
minate gradually from the bottom left of the
display up to the 200 °C bar. This shows
the progress of the preheating.
Once the cooking chamber has been pre-
heated, two short beeps will sound. The
temperature indicator
6. Open the cooking chamber door (1) and
put the food to be cooked in the cooking
chamber.
7. Turn the adjustment dial until the indicator
appears on the display (14).
20 : 0 0
8. Press the "Start/+30sec./Confirm"
button (18).
The cooking process will start; the indicator
and the bar will flash at the bottom of
the display (14).
Once the cooking time has elapsed, five
beeps will sound.
and
will flash.
200
Cooking without preheating
1. Press the "Convection" (11) button.
The indicator
will flash on the dis-
150
play (14); at the same time the indicator
will illuminate at the top, and the "°C" in-
dicator will illuminate on the right. A bar will
also flash at the bottom left of the display.
2. Turn the adjustment dial (19) until the
required temperature appears on the dis-
play.
3. Press the "Start/+30sec./Confirm" but-
ton (18).
The indicators will no longer flash.
4. Turn the adjustment dial until the required
cooking time appears on the display.
5. Press the "Start/+30sec./Confirm"
button (18).
The cooking process will start. Once the
cooking time has elapsed, five beeps will
sound.
You can also set the desired cooking tem-
perature by pressing the "Convection" button
several times in a row. The following table
gives an overview:
Button press
1x
2x
3x
4x
5x
6x
7x
8x
9x
10x
Display indicator
150
160
170
180
190
200
210
220
230
240