Privileg AC925EBL Gebrauchsanleitung Seite 61

■ Do not operate the appliance with an
external timer or a separate remote
control system.
■ Never operate the microwave without
a turntable and never without food!
Fast cooking
Using the "quick cook" function you can begin
cooking immediately with no need to make
additional adjustments. With fast cooking,
food is cooked for 30 seconds at maximum
power.
• Press the "Start/+30sec./Confirm" but-
ton (18).
The cooking process will start; the remain-
ing cooking time will count down on the
display (14) and the indicator
Extending the cooking time
You can extend the cooking time in 30-sec-
ond increments while cooking in many cook-
ing programmes.
Exception: This is not possible with the follow-
ing programmes:
– Automatic programmes
– The programme "Defrosting by weight" (
– Multistage cooking
To extend the cooking time,
– press the "Start/+30sec./Confirm" but-
ton (18) during the cooking process.
The remaining cooking time is extended by
30 seconds.
The cooking time extension can be repeat-
ed several times if necessary.
Setting the power level
By default, the microwave is set to power lev-
el ; that is, to 100 % microwave power.
P100
To change the power level,
1. Press the "Microwave" button (9).
will appear on the display (14).
P100
2. Press the "Microwave" button once again.
The display changes to
The following table shows which power levels
are available and how you can select them:
Pressing the
button
1x
2x
3x
4x
5x
6x
Setting the cooking time
You can only set a cooking time if you have
previously selected a function
– "Microwave" (Display – indicator
– "Grill/Combi" (Display – indicator
will flash.
– "Convection" (Display – indicator
To set the cooking time,
– select the required function (
– turn the adjustment dial (19) until the de-
sired cooking time is set.
The cooking time can be set with the follow-
ing steps:
0–1 min:
)
d-1
1–5 min:
5–10 min:
10–30 min:
30–95 min:
The maximum cooking time you can set is
95:00 minutes.
Example: You want to cook at a power level
of 80 % for 3 minutes.
Operation Page EN-21
.
P80
Display
Power level
indicator
100 %
P100
80 %
P80
50 %
P50
30 %
P30
10 %
P10
100 %
P100
)
)
).
, or
5 seconds
10 seconds
30 seconds
1 minute
5 minutes
),