General Safety Instructions; General Power Tool Safety Warnings - Parkside Pssa 20-Li B2 Bedienungsanleitung Und Originalbetriebsanleitung

NOTE
The vibration emission values and
u
the noise emission values given
in these instructions have been
measured in accordance with a
standardised test procedure and
can be used for comparison of the
power tool with another tool .
The specified total vibration values
u
and the noise emission values can
also be used to make a provisional
load estimate .
WARNING!
m
Depending on the manner in which
u
the power tool is being used and,
in particular, the kind of workpiece
being worked, the vibration and
noise emission values can deviate
from the values given in these
instructions during actual use of the
power tool .
Try to minimise exposure to
u
vibration and noise . Examples
of measures to reduce vibration
include wearing gloves when using
the tool and limiting working time .
All parts of the operating cycle must
be taken into account (e .g . times
when the power tool is switched
off and when it is running idle in
addition to the trigger time) .
General safety
instructions
˜ General power tool safety
warnings
WARNING!
m
Read all safety warnings,
instructions, illustrations
and specifications provided
with this power tool. Failure
to follow all instructions listed
below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool .
Work area safety
a) Keep work area clean and well
lit. Cluttered or dark areas invite
accidents .
b) Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create
sparks which may ignite the dust or
fumes .
c) Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control .
Electrical safety
a) Power tool plugs must match the
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
power tools. Unmodified plugs and
matching outlets will reduce risk of
electric shock .
GB/IE/NI 9