Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Configuratio
n
Switching time
The switching time of the output can be
◆
configured.
The configured value is multiplied by
◆
10ms.
Switching pulses from 10ms to 2,550ms are
◆
possible in steps of 10ms.
Inversion
If an output is inverted, the green and red
◆
connections are reversed.
Condition
You can configure whether the output should
◆
be restored when the decoder is started.
Outputs
1 second corresponds to 1,000 milliseconds
◆
The default value of 40 means a
◆
switching time of 400ms, i.e. 0.4 seconds.
The switching time is only used for the
◆
switching type switching pulse.
For example, counter-rotating points can be
◆
can be switched with the same address.
Connection
The last selected output connection is saved
◆
here.
14
Werbung
