Herunterladen Inhalt Inhalt Diese Seite drucken

Display Mode - Samsung SMT-4011 Bedienungsanleitung

Tft-lcd monitor
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 240
Audio Input 2
PC Audio Input
Frequency
Response
Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor
installation will proceed automatically, unless the user wishes to select alternate settings.
Dot Acceptable
TFT LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one
millionth) above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to
be bright sometimes or some black pixels may be seen. This is not from bad quality and you can use it without
any problelms.
• For example, the number of TFT LCD sub pixels contained in this product are 3,133,440.
Note
• Design and specifications are subject to change without prior notice.
Class B Equipment (Information Communication equipment for residential use)
• This product complies with the Electromagnetic Compatibility Directives for residential use and can be
used in all areas including common residential areas. (Class B equipment emits less electromagnetic
waves than Class A equipment.)
This monitor has a built-in power management system called PowerSaver. This system saves energy by
switching your monitor to low-power mode when it has not been used for a certain amount of time. The monitor
automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn
your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system
operates with a VESA DPM compliant video card installed in your computer. Use the software utility installed on
your computer to set up this feature.
Normal
State
Operation
Power Indicator
Green
Less than
Power Consumption
210 W
Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be
adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer
to the video card manual and Adjusts the screen as follows.
Horizontal

Display Mode

Frequency
IBM, 640 x 350
IBM, 640 x 480
IBM, 720 x 400
RCA Jack Red(R) White(L), 0.5 Vrms (-9 dB)
3.5 Ø Stereo Jack, 0.5 Vrms (-9 dB)
RF: 80 Hz ~ 15 kHz (at -3 dB)
A/V: 80 Hz ~ 20 kHz (at -3 dB)
Power saving
mode
EPA/ENERGY 2000
Green, Blinking
Less than 1 W
(Off-mode)
This monitor is EPA E NERGY STAR
compliant when used with a computer equipped with VESA DPM
functionality.
®
As an E NERGY STAR
Partner, SAMSUNG has determined that this
product meets the E NERGY STAR
Vertical
Frequency
(kHz)
(Hz)
31.469
70.086
31.469
59.940
31.469
70.087
68
PowerSaver
Power off
Power off
Amber
Black
Less than 1 W
0 W
(Power button)
(Power Switch)
®
compliant and ENERGY2000
®
guidelines for energy efficiency.
Preset Timing Modes
Pixel Clock
Sync Polarity
(MHz)
(H/V)
25.175
+/-
25.175
-/-
28.322
-/+

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Smt-4011p

Inhaltsverzeichnis