Samsung SMT-4011 Bedienungsanleitung Seite 28

This stand is designed for adjusting the screen angle. The company is not responsible for any problem
caused when using this stand. Under no circumstances use the product as a stand for placing something on.
Installing the Stand KIT (sold separately)
1) A 'Cover-Protector' is used to protect the hole at the bottom of the LCD monitor , where the stand is
inserted. Be sure to remove the 'Cover-Protector' when attaching the provided Semi Stand or Stand KIT
(sold separately) and cover the hole using the 'Cover-Hole' when attaching the wall mount kit.
2) Ensure that the parts are inserted in the right direction and in the right place. (M4 × L15)
3) Insert the stand into the hole at the bottom of the LCD monitor.
4) Insert the screw into the hole indicated and tighten it. (M4 × L15)
Using a Power cord with Earth
In the event of failure, the earth lead may cause electric shock. Make sure to wire the earth lead in
correctly, before connecting the AC power. When un-wiring the earth lead, make sure to disconnect
the AC power in advance.
Note
• AV input devices such as DVD players, VCR's or camcorders as well as your computer can be connected
to the LCD monitor. For detailed information on connecting AV input devices, refer to the User Controls
under Adjusting Your LCD monitor.
Connecting to a Computer
Connecting the LCD monitor