Multi Control; Direct Functions - Samsung SMT-4011 Bedienungsanleitung

Available Modes
PC / BNC / DVI
AV
S-Video
Component
DVI-Video

Multi Control

Assigns an individual ID to the SET.
1) ID Setup
[MENU] [ / ] [ENTER]
Assigns distinctive IDs to the SET.
2) ID Input
[MENU] [ / ] [ENTER]
Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds to the
transmitter setting becomes activated.
Available Modes
PC / BNC / DVI
AV
S-Video
Component
DVI-Video
MDC
Moves to the Multi Control OSD screen.
LOCK
Sets the Safety Lock function.
1) Lock On
It will be locked.
2) Lock Off
It will be unlocked.
Note
• When setting the Lock function, you can only operate the lock button on the remote control and set.
The preset password on the LCD monitor is "0000".
Note
• Resetting the password for the function key lock.
Press MUTE 1 8 6
resetting the password.
[ / ] [ENTER] [ENTER]
[ / ] [ENTER] [ENTER]
On. The password will be reset to '0000'.
© 1995~2008 SAMSUNG. ALL Right Reserved
Multi Control
[0~9]
[0~9]

Direct Functions

The remote control is required for