Rollei Powerflex X8 Dual Lens Anleitung Seite 42

Charging the Camera
42
1. After installing the battery, use a USB-C cable and a 5V charger to charge the
camera.
2. Indicator Light:
Red light steady on: Charging in progress.
Red light off: Charging completed.
Red light flashing: No battery installed.
Blue light flashing: Camera is recording video.
Blue light steady on: Camera is in standby mode.
Note: For first-time use, please fully charge the battery before using the camera.
Inserting and Removing the Memory Card
1. Open the battery cover. Insert the
microSD memory card as shown in
the diagram, and press it in until it
locks into place.
ENGLISH
ENGLISH
2. To remove the memory card: Press
the memory card gently, release it
slowly, and it will pop out. Remove
the card.