Insert The Batteries - Xavax Ronda Bedienungsanleitung

4. Controlsand Displays
• Button on the rear side: Select the unit:
• kilogram s (kg),pounds (lb)or stones (st)
5. GettingStarted

5.1 Insert the batteries:

• Usea PCS CR2032 coin cell battery.
• T o change thebattery, o penthe battery cover on
thebackofthe device, inserta CR2032 battery
with thecorrect p olarity (positive poleatthetop)
intothebatterycompartment. Close thebattery
compartmen t fully.
Note
• Beforeusingthe scalesfor the first time
or after moving the scalesthey mustbe
restarted.Without restartingthem, the
measurements could be incorrect
6. Operation
• Place the scale on a clean and level surface.
• Ensure that the scale is stable.
Weighing:
• Thescaleswitcheson automaticallywhen you
stepon it. Your bodyweight flasheson the
displayduring the weighing process.
• Wait until the displayedweight stopsflashing.
Oncethe weight has stabilised,it is displayedfor
another 15 seconds.
• Thescalethen switchesoff automatically
Errormessages
• Theerror message "Err" is displayedwhen the
scale is overloaded.
• Themessage "10" indicatesthat the battery
is nearlydead.Replace the battery assoonas
possible.
Note
• To ensure accurate measurements, we
recommend thatyouweighyourself a tthe
sametime eachday (e.g. in the morningright
afteryouwakeup)
Note
• When the weight displayedby the scales
seems to be incorrect, check that the contact
betweenbatteryand the contactsis in proper
working order. If you haven't usedthe scales
in a long time, changethe batteryand try
agam
7. Care and Maintenance
• Onlycleanthis productwith a slightlydamp,
lint-free cloth and do not use aggressive cleaning
agents.Make surethat water doesnot get into
the scales.
8. Warranty Disclaimer
HamaGmbH& Co.KGassumes no liability and
providesno warranty for damageresultingfrom
improperinstallation/mounting,improper useof
the product orfrom fallure to observethe operating
instructionsand/or safetynotes.
3