Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Mechanical Settings of the Microwave Field
Tilting the microwave module
450
50
Remedying Malfunctions
Symptom
Door reverses
Door reverses
Dooropensinadvertently
Doordoesnot open
sporadicnan-detection
of an individua
Late detection or
non-detection of persons
Technical
Data
Technology
Transmitting frequency
Transmitting power
Operating voltage
Operatingcurrent
Mains frequency
Temperature range
Air humidity
Mounting height
Relay output
Switching voltage
Switching current
Switchingcapacity
Housing
Weight
Protection
class
Min. detection
speed
Cable length
Approvals
Overview
of countries
8
50
450
Possible
cause
— Sensor sees door
—Sensorsees swing door
— Interference source affects microwave fie d
(eq fluorescenttubes)
Largegroup cf persons
approaching
— Field too small
—Installationtoo high
Microwave
motion detector with
planar moduletechnology
24 125 GHz
< 20 dBm
12-36 V DC / 12-28 V AC
50 mA at 24 V DC, 240 C
50 Hz
-200 Cto + 600 C
0 to 90 % rel., without condensation
up to 4m
Potential-freechangeover contact
max 48 V ACDC
max 05 AAC/I
ADC
max 60 VA/
W
Cover:PC; f loor plate: ABS
Dimensions (W x Hx D):
176 x 62 x 52 mm
150g (withoutcable)
Suitable for use acc. to P 54
5 cm/s (in sensor axis)
< 5 cm/swith SMD+(inclination ang e 350)
CE 0682 !
EU; EFTA;US, CA
Montageanleitung
Swivelling the microwave module
—300
+300
Remedy
— Changethe inclination ange of the radarmodule
—Install s ensor h igher a ndif possib e directly above thedoorhinge
— Increase CTM level
— Swivel the sensorin the directionof the door opening
Activate the interferencesuppression fi ter
— Activate the special f ilter function MTO @+@
(MassTrafficOptimisation)
- Decrease the CTM evel(switch off)
— Checkfield size@
— Activate high mountingheight
Fccnc
This device contains a 24 GHz transmitter
6902A-IP005. I t meetsthe requirementsof Part15 of the FCC regulationsand
the RSS-210 standardof ndustryCanada
Operationis subjectto the following conditions:This device(1) mustnot cause
anydangerousmalfunctionsand (2) mustcopewith all malfunctions. T his also
includes malfunctions
that can cause undesired functions
Warning: If any changes or modifications are made to this
device that are not expressy approved by GEZE GmbH,
the FCC approvalto operatethis devicecanexpire
GC 302 R
+300
-300
Refer to chapter
611
523
6.1 1
5.23
523
523
523
with the FCC-ID UXS-IP005 and C-ID
123457 70705-9-9521 Ä-st.l
Werbung
