Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Cleaning and Maintenance
Empty the dust cup when dust inside
is paralleled with the lower rim of filter
case. Otherwise, the suction may be
weakened.
Dust container and filter assembly
detach dust container
09
Open the dust cup lid to dump dust.
Clean filter assembly
Note: After washing the HEPA
filter and filter sponge, please
dry them before use.
Disassembly and Maintenance
HEPA
honeycomb filter
dust cup
Attention:
1. The center filter assembly must be dried if it is washed before it can be
assembled for normal use.
2. The central filter assembly can be washed. For optimum cleaning
performance, please dump the garbage and clean the center flter
assembly in time. Please clean the center filter assembly after about 10
times' use. However, in order to ensure the best performance of the
machine, it is recommended to replace the filter assembly every 3 months
according to the machine usage.
Installation of dust contain
1. Snap the dust container into
thengine. Please note that the in
the snaps needs to bein the
place.
Limit bayonet
Limit bar
2. Push the bottom of the dust
container in the direction shown
in the picture, until you hear a
click.
10
Werbung
