Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Instructions
Product use
The default mode at power on is Auto mode, as shown in the following figure
As shown in the figure below, press the 7c button to switch to manual gear in
the power-on state.After switching, the default is manual gear low speed.
Touch the 7c button again to adjust the upshift to medium speed gear, and
touch the 7c button again to adjust the upshift to high speed gear.7c button
again to switch to automatic mode.
Vacuum Cleaner Use
The metal extension tube can be selectively used depending on the actual
environment.
Use of the electric floor broom
The electric floor broom can be used to clean hard floors, floor tilesor short-
haired carpets. It is recommended to use a metal extension tube for a better
experience. (figura 1)
07
7c
(figura 1)
Product use
Use wide nozzle tips
Insert the wide nozzle tip into the nozzle
holder and fix it for use.
The wide mouth suction can be used to
clean sofas, mattresses, cribs, etc.
(figura 2)
Use of the long flat suction tip
Insert the long flat suction tip into the
suction tipholder and fix it for use.
The long flat suction tip can be used to
clean ceilings, bookshelves, computer
keyboards and narrow gaps that are not
easy to be cleaned up, etc.(figura 3)
Use of 2-in-1 brush tip
Insert the 2-in-1 brush into the tip holder and
secure it for use.
1. Directly connected to the engine, the 2-in-1
brush can be used to clean desktops, cabinets,
sofas, short-haired carpets, etc.(Figura 4)
2. Attach the metal extension tube, the 2-in-1
brush can be used to clean the ceiling,
curtains and other heights. (Figura 5)
figura
(
2)
(
3)
figura
(
4)
figura
(
figura
5)
08
Werbung
