Midea V15 Ultra Bedienungsanleitung Seite 3

Accessory installation
Installation of the charging station on the wall:
1. Drill two screws into the holes of the hanger.
2. Insert plastic expansion tubes into the screw holes.
3. Align the hanger with the screw holes, then
assemble and tighten the screws.
Parameters
Model/Article No. V15 Ultra
Nominal voltage 29.6V
Rated power
600W
Rated input current 0.5A
100-240V～50/60Hz
Adapter rated input
Adapter rated output
35V
Charging time
4.5-5h
05
battery charging
Product use
During the working process of the machine, when the power of the LED display
module shows 00%, it indicates that the power is insufficient and needs to be
charged. Please follow the steps below:
(1) Use the built-in charger of the machine to charge.
(2) Turn off the power of the host, and insert the adapter into the charging port.
(3) The LED display module displays the real-time power, and the LED light on
the battery pack flashes, indicating that the charging is normal.
(4) The LED display module displays 100%, and the LED light on the battery
pack is always on and stops flashing, indicating that the charging is complete.
Power display
DC port charging
Attention:
1. This machine can only be charged with the supplied power adapter.
2. The machine can't work during the charging process. At this time,
pressing the power switch, the machine does not work.
battery pack indication
LED lights
charging port
Wall-mounted charging
06