Solo CLEANLine 360-B Originalbetriebsanleitung Seite 8

 Model series B
- type 360 B (EPDM seals) is suitable for
application of pH-neutral to alkaline spraying
agents in the pH range of 7 – 14
 The pressure sprayer must not be used for all
purposes not named above, such as
 - spraying of paints
- distribution of
* flammable liquids
* sticky, residue-forming agents
* surfactants
* fluids with temperatures
above 40 C [104 °F]
* agents not intended for distribution by
pressure sprayers
and
- storage of fluids!
3.2 General safety notes
Read the original instructions before first
use and keep it in a safe place.
Non-observation of information provided in
these original instructions may potentially be
fatal; the user is liable for any damage, direct or
consequential, caused by this.
This appliance is not intended for use by persons
(including children) with reduced physical,sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
The appliance must only be supplied at safety
extra-low voltage corresponding to the marking
on the appliance.
A lithium-ion battery is built into the spray head of
the 360 B sprayer. The battery is only to be used
to operate this device. Do not remove the battery
and keep the device away from open flames and
do not expose it to direct sunlight or other heat.
The battery must not be opened, disassembled or
shredded.
Do not expose the appliance or battery to
excessive temperatures.
Be aware of the risk of terminals of the battery-
operated appliance or battery being shortcircuited
by metal objects.
Ensure that the device with the rechargeable
battery are disposed of or recycled at an official
disposal or recycling facility for electrical
equipment.
The original instructions must be kept on hand at
the site of use of the sprayer at all times.
It must be read by all who are charged with any
work with and on the device (including for
maintenance, care and repair).
 Persons under the age of 18 must only work
ENGLISH 2
under supervision with this sprayer.
 Keep persons and animals away from the
working area. Never spray in the direction of
any persons, animals or objects that could be
hurt or damaged.
 This sprayer must only be passed on to
persons who are familiar with this model, its
operation and the original instructions.
 If you work with this sprayer, you should be
physically fit, rested and healthy.
 Do not use the sprayer while under the
influence of alcohol, drugs or medication.
 Never make any changes to existing safety
provisions and operating parts.
 Replace damaged parts without delay. Only
use SOLO genuine spare parts.
 Only use factory approved accessories and
attachments for this sprayer.
 Empty and clean the sprayer according to the
information in chap. 8.1 for this. Prevent
unauthorised access to the machine.
3.3 Safe handling of spraying liquids
 Follow suitable procedures and use collection
containers to prevent any contamination of the
environment, the public waterways and/or
storm water systems from chemical agents and
cleaners. This can happen while mixing, filling,
using, emptying, cleaning or during transport.
 Always collect chemical spray liquids and
cleaners (including residues) in suitable
containers and return them to collection points
specified by the municipal administration.
 In case of skin or eye contact, rinse or flush the
affected body parts with plenty of clean water.
Seek medical advice without delay.
 Contaminated clothing should be changed at
once.
 Never eat or drink while handling spray liquids
 If you feel nauseous during work, or if you are
excessively fatigued, stop working at once. If
the condition persists, seek medical advice
without delay.
 Never permit children or persons work with or
handle spraying liquids if they are not familiar
with these substances.
 Never fill different spray solutions into the spray
tank.
 When changing the spray solution, clean the
spray tank and all parts that come in contact
with the spray solution. Operate the sprayer
with clear water first before filling the spray tank
with the different spray solution.
 At the end of work, empty and clean the
sprayer according to chap. 8.1, clean your face
and hands thoroughly, take off work clothing
and wash it regularly.