Solo CLEANLine 360-B Originalbetriebsanleitung Seite 7

Handheld battery sprayer 360 B
Original instructions
Read this instruction manual carefully before first
operation and strictly observe the safety
regulations!
Changes to the scope of supply in form,
technology and equipment are reserved. No
claims can be derived from any information and
figures in these original instructions.
The original packaging and, at the end of its
service life, the sprayer must be properly
disposed of according to the local environmental
regulations.
The machine can be subject to national rulings for
regular review by designated offices, as specified
in directive 2009/128/EC.
Information about material ingredients
(VO (EC) No.1907/2006 „REACh")
can be found on our homepage under:
https://de.solo.global/de/content/12-service
1 EC declaration of conformity
SOLO Kleinmotoren GmbH, Industriestraße 9,
D-71069 Sindelfingen, Germany, declares that
the handheld battery sprayer type 360 B
corresponds to the following the relevant
provisions of the 2014/30/EU (EMC), 2011/65/EU
(RoHS), and 2006/42/EC (machinery incl.
2009/127/EC) from the manufacturing date of
01/2022 onwards.
Sindelfingen, 01.06.2024
, S OLO Kleinmotoren GmbH,
Sascha Luft
Industriestraße 9, D-71069 Sindelfingen
(managing director and documentation officer)
UK - DECLARATION OF CONFORMITY
We, SOLO Kleinmotoren GmbH, Industriestraße
9, D-71069 Sindelfingen, Germany declares
under our sole responsibility that the product
handheld battery sprayer type 360 B to which
this declaration relates is in conformity with the
essential requirements and other relevant
requirements of the following regulations:
Supply of Machinery (Safety) Regulations 2008,
Electromagnetic Compatibility Regulations 2016,
The restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic
Equipment Regulations 2012
Sindelfingen, 01.06.2024
Sascha Luft (CEO)
2 Warranty
Please observe that specific warranty conditions
are valid in some countries. In doubt, ask your
vendor.
No guarantee can be granted for any damage
caused by:
 Non-observation of the original instructions.
 Omission of necessary maintenance and
cleaning work.
 Wear and tear from regular use
 Use of unapproved working tools.
 Use of force, improper treatment, abuse or
accident.
 Manipulations by non-qualified persons or from
improper repair attempts.
 Unauthorized modifications to the device.
 Use of unsuitable spare parts or non-genuine
spare parts.
 Use of unapproved chemicals or dilutions.
 Damage caused by use in the rental business.
Any warranty work must be performed by one of
our authorised specialist vendors. Cleaning, care
and standard adjustments are not accepted as
warranty services.
For Australia only: Supplementary warranty notes
specifically for Australia
To make a claim, contact Clayton Engineering, 26
French Ave, Brendale, Q, 4500 on phone
1300 798 022 or email
sales@claytonengineering.com.au. You will be
asked to provide proof of purchase and then will
be instructed on the procedure for repairing or
replacement of the product under warranty. All
costs incurred for repair or replace, and additional
claims can be discussed at this stage.
This warranty is provided in addition to other
rights and remedies you have under law: Our
goods come with guarantees that cannot be
excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a
major failure and for compensation for any other
reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major
failure.
3 Safety provisions
3.1 Intended use
 The pressure sprayer must only be used to
apply the cleaning agents and disinfectants
described below.
The media used generally must be released for
application via pressure sprays by the
manufacturer. Strictly observe the guide lines
provided by the chemical manufacturer.
ENGLISH 1