Citrus Press - Bosch MCM64080 Gebrauchsanleitung

Fig.

Attach the bowl (arrow on bowl on dot

on the appliance) and rotate as far
as possible in a clockwise direction.
Insert drive shaft into the bowl.

Take disc out of the protective cover.

Place disc on disc holder.

Turn required slicing/shredding side face
up. Place disc onto the disc holder such
that the drive couplings on the disc holder
grip into the disc openings.
Disc must rest on the lateral lug
of the disc holder.
Lightly rotating, attach disc holder

to the drive shaft.
Risk of injury from sharp blades!
Do not place fingers in the feed tube.
Only use the pusher when adding more
ingredients.
Attach lid (match arrow on lid on dot on

bowl) and rotate in a clockwise direction.
Lid lug must be located fully in the slot
in the bowl handle.
Insert pusher and pusher insert.

Insert the mains plug.

Set the rotary switch to the desired

setting.
Fill with contents which are to be sliced

or shredded.
When adding contents which are
to be sliced or shredded, apply only
light pressure to the pusher.
Remove the pusher and add ingredients

through the feed tube.
Add long and thin contents using the

pusher. To do this, remove pusher insert.
Warning!
Empty the bowl before it becomes so full that
the cutting or grating contents reach the disc
holder.
Instructions for cutting chocolate:
Add chocolate before switching on the appli-
ance and cover with the pusher.
After switching on the appliance, push down
with the pusher.
After using the appliance
Set the rotary switch to 0/off.

Remove mains plug.

Rotate the lid in an anti-clockwise

direction and remove.
Robert Bosch Hausgeräte GmbH
Remove tool:

– Remove tool holder together with
the universal blade out of the bowl.
Remove the tools from the tool holder.
After cleaning the universal blade,
attach the blade guard.
– Lift the disc holder on the recesses
from the bowl. Take out discs.
Take drive shaft out of bowl.
Rotate the bowl in an anti-clockwise

direction and remove.
Clean all parts, see "Cleaning and

servicing".

Citrus press

for pressing the juice out of citrus
fruits, e.g. oranges, grapefruits,
lemons.
Warning!
The citrus press must be completely
assembled before use.
Fig.

Attach the bowl (arrow on bowl on dot

on the appliance) and rotate as far
as possible in a clockwise direction.
Insert drive shaft into the bowl.

Attach the strainer basket to the drive

shaft (arrow on citrus press on arrow
on the bowl) and rotate in a clockwise
direction. The lug on the strainer basket
must be located fully in the slot in the bowl
handle.
Attach and press on pressing cone.

Insert the mains plug.

To extract juice from the fruits, set

the rotary switch to low speed and
press the fruit onto the pressing cone.
Warning!
Check the level. Maximum processing
quantity: 1000 ml fruit juice.
After using the appliance
Set the rotary switch to 0/off.

Remove mains plug.

Rotate the citrus press in an anti-

clockwise direction and remove.
Rotate the bowl in an anti-clockwise

direction and remove.
Clean all parts, see "Cleaning and

servicing".
en
17