HOMCOM A90-175 Bedienungsanleitung Seite 9

Cleaning And Maintenance Of The Machine
Please confirm you have cut off the power before clean. The power plug has been
pulled out the socket. Then you can use the cloth with detergent to clean foot skin and
shell. Last, Use dry cloth deal with these detergent.
Caution
Do not use benzene, thinner and alcohol. gasoline and other corrosive and volatile
cleaners to clean the products.
Otherwise maybe cause the product discoloration or internal structure corrosion,
cracking, etc.
For the remote control, you only use the dry cloth clean, not the wet.
Please confirm you have cut off the power and the plug is pulled. Wipe off the dust and
dirt, please move to the place away from the heating, another also prevent the wet. lf
you will not use for a long time. please use the dusty cover.
Common problems and treatment methods
Case
Can not start
"Xiuxiu"or"Dada"
sounds when the
machine is
working
Remote control
operation did not
respond
Stop during use
Can't operate
normally
If it has not been removed after the above method, please contact the manufacturer or
local distributor, do not disassemble and repair it.
Product Parameters
Product name: Vibration Platform
Voltage: 220V-240V~ 50Hz
Power: 200W
Probable cause
The power plug is not plugged in
Product power switch is not
turned on
The instantaneous current is
too large and the fuse is blown
This is the sound that the
machine makes when it is
running, not the machine
failure. It is a normal working
sound.
The remote control battery is
dead
The remote control is too far
from the machine
Has reached the default
working time
May execute commands too
frequently
Plug in the power plug
Turn on the power switch
Replace the fuse of the same
model
No need to deal with.
Replacement battery
The effective distance of
infrared sensing is 2.5 meters
Turn it on again after 10
minutes
Turn off the power and restart
9
Method