Werbung
Verfügbare Sprachen
Verfügbare Sprachen
How to use the buttons
10
Timer operation
Pressing the TIMER ON button can set the auto-on time of the
unit. Pressing the TIMER OFF button can set the auto-off time
of the unit.
To set the Auto-on time.
Press the TIMER ON button. The remote controller shows
1
TIMER ON, the last Auto-on setting time and the signal "H"
will be shown on the LCD display area. Now it is ready to
reset the Auto-on time to START the operation.
Push the TIMER ON button again to set desired Auto-on
2
time. Each time you press the button, the time increases
by half an hour between 0 and 10 hours and by one hour
between 10 and 24 hours.
After setting the TIMER ON, there will be a one second
3
delay before the remote controller transmits the signal to
the air conditioner. Then, after approximately another 2
seconds, the signal "H" will disappear and the set
temperature will re-appear on the LCD display window.
To set the Auto-off time.
Press the TIMER OFF button. The remote controller shows
1
TIMER OFF, the last Auto-off setting time and the signal
"H" will be shown on the LCD display area. Now it is ready
to reset the Auto-off time to stop the operation.
Push the TIMER OFF button again to set desired Auto-off
2
time. Each time you press the button, the time increases
by half an hour between 0 and 10 hours and by one hour
between 10 and 24 hours.
After setting the TIMER OFF, there will be a one second
3
delay before the remote controller transmits the signal to
the air conditioner. Then, after approximately another 2
seconds, the signal "H" will disappear and the set
temperature will re-appear on the LCD display window.
Climate 5000 – 6 720 866 393 (2019/11)
Werbung
