Operation of buttons
6
Swing
Button
10
Used to stop or start vertical louvre movement and set the
desired left/right air flow direction. The vertical louvre
changes 6 degree in angle for each press. And the
temperature display area of indoor unit displays ‛ ' for one
second. If kept held more than 2 seconds, the vertical
louvre swing feature is activated. And the display area of
indoor unit displays ‛IIII', flashes four times, then the
temperature setting reverts back. If the vertical louvre
swing feature is stopped, it displays ‛LC' and remains on for
3 seconds.
NOTE: For some units, the indoor units display ‛
the swing feature is activated, and display ‛
swing feature is stopped.
Swing
Button
11
Used to stop or start horizontal louvre movement or set the
desired up/down air flow direction. The louvre changes 6
degrees in angle for each press. If held down more than 2
seconds, the louvre will swing up and down automatically.
LED Button
12
Disable/Activate indoor screen Display. When pushing the
button, the indoor screen display is cleared, press it again
to light the display.
Climate 5000 – 6 720 866 393 (2019/11)
' when
' when the