• In case of excessive resistance, pull the handle forwards slightly by twis�ng
off the locking screw which is located on the other side of the wheel lock
(from the inside of the wheelchair). Set the wheel lock shoe in such posi�on
that the wheel lock blocks the wheel easily and without resistance.
• When the wheel lock shoe does not touch or lock the wheel sufficiently,
follow the above instruc�on by moving the handle in the opposite direc�on.
ATTENDANT BRAKES
The levers of the brakes are located behind the backrest, under the hand grips on
the right and le� side, and are connected with wheel lock by cable.
• In order to apply emergency breaking or stopping lock, squeeze the lever of
the brake and in order to release the brake, drop the levers. Perform this
ac�vity smoothly and with appropriate force.
Note! These brakes should not be used to slow down the wheelchair. If they are
o�en used for this purpose, they may cause tyre abrasion which will not be
covered by guarantee terms.
FOLDING BACKREST
• To fold the backrest, simultaneously pull downwards the locking elements
which are located under the hand grips at the back of the backrest.
ADJUSTMENT FOR PATIENTS AFTER AMPUTATIONS IN THE LOWER LIMBS AREA
Note! For professional adjustment, ask your retailer or other person who has
appropriate knowledge and qualifica�ons. Do not adjust inclina�on angle of the
seat by yourself.
• To adjust the centre of gravity, unscrew fixing screw in right and le� wheel.
Then, set the seat inclina�on by moving fixing axis of the wheel upwards or
downwards, the same in both wheels.
• The seat inclina�on should be set in such a way so that the user does not
slide down from the wheelchair and can freely use handrims.
SEAT BELT
• The belt, which is included in the standard equipment, protects the trunk in
cases when the user slides down from the wheelchair or is not able to keep
correct posi�on independently. The belt is fastened with the use of buckle.
37