ACD R3 ALULINE Bedienungsanleitung Seite 24

Page 1 Façade
Assemble the ridge plate with the bulges pointing downward, in the bolt slots. You assemble 2 façades.
Mount the profiles FA & FB with the small hole (Ø3) towards the ridge side (see detail 10).
Page 2 Stop bolts
!10! stop bolts are placed per facade!!!
Page 3 Sidewall + stop bolts
Stop bolts are placed on each sidewall (see detail 1 and detail 5). You assemble 2 sidewalls in total.
Number of stop bolts per sidewall:
Greenhouses with less than 7 windows:
-
- Greenhouses with 7 or 8 windows:
Greenhouses with 9 or 10 windows:
-
- The length of Profiles A & B depend on the type of greenhouse you have purchased.
R304
2981
Page 4 Assembly
Repeat pages 1,2 and 3 for the second gable and side wall. You now have 2 gables and 2 sidewalls.
Slide the panels one into the other until the end, the stop bolts are immediately tightened firmly and definitively.
Page 5 Roof
- The lengt of Profile B and Profile C depend on the type of greenhouse you have purchased.
PROFIEL B:
PROFIEL C:
- First install the ridge (profile C) on top of the 2 façades and fix it definitively with the stop bolts.
- Greenhouses that are 7 & 8 windows long are provided with 2 glass rods (profile A) of each 2 stop bolts.
- Place the glass rods (profiles A) between the sidewall and the ridge you just put in place (profile C) .
- Assemble the traction strips (profiles B) to the ridge (profile C) in the corner and subsequently together
with the glass rod (profile A) at the sidewall.
ATTENTION: the traction strips start from the façade in the ridge and go down to the gutter. (See detail page 5)
ATTENTION: If you bought a ridge decoration, mount it on the ridge profile before mounting the ridge profile itself
R305 R306 R307 R308
3720 4458 5196 5935
R304 R305 R306 R307
1781 2180 2180 2723
R304 R305 R306 R307
2981 3720 4458 5196
2 stop bolts per side wall
3 stop bolts per sidewall. Place an extra stop bolt at detail 1 and
slide it into the middle of the profile.
4 stop bolts per side wall. Place 2 extra stop bolts at detail 1 and
slide it into the middle of the profile.
R309 R310
6673 7412
R308 R309 R310
2723 2723 2723
R308 R309 R310
5935 6673 7412
N