laufen CLEANET PRO LITE Bedienungsanleitung Seite 13

6 CLEANING AND MAINTENANCE
6.1 CLEANING MODE
The cleaning mode (including nozzle extension) is activated by using the
CLEANET SIT LITE
CLEANET SIT LITE
LAufen Smart Connect APP.
When cleaning mode is activated, nozzle will be extended for 5 minutes (and
a green light turns on) and retract automatically or pressing controller rotary
button 5 seconds for exiting cleaning mode manually. Also it can be stopped
by using APP.
REMOTE CONTROL OPERATION
Cleaning mode (including nozzle extension) is activated by pressing rotary
button on remote + lady wash for 3 seconds, and the nozzle will be extended
for 5 minutes (and a green light turns on) and retract automatically or pressing
controller rotary button 5 seconds for exiting cleaning mode manually.
Do not use abrasive cleaning products. Only use neutral abrasive cleaning products.
Do not pull or push the nozzle manually.
It is forbidden to pull out nozzle by hand directly.
CLEANING BETWEEN THE CERAMIC AND THE CLEANET LITE SURFACE
6.2
The product is fixed by a clip and some magnets.
It can be disassembled from the magnet fixation if you pull up the device, but keep the clip
bracket in place in order to clean the ceramic surface under the working parts of the smart
toilet.
Doing that, it is possible to clean the toilet surface under the e-bidet device.
Do not completely disassemble the equipment or turn it over.
Take care not to damage electrical components.
Do not use abrasive cleaners.
(Optional, not included with product)
13