Xblitz iGO Bedienungsanleitung Seite 16

2. The device does not switch on/off automatically
The reason for this behaviour may be the constant power supply in the
cigarette lighter socket.
3. The camera stops recording / does not overwrite recordings
Check: G-SENSOR - a function by which recordings with recorded
overloads (e.g. uneven pavement, braking, driving off a kerb or over a
speed bump, etc.) are protected from being overwritten. If you use this
function, you must periodically format the memory card on your com-
puter and then on the camera. Ultimately, each file on the data carrier
will be protected from being overwritten and the device will not be able
to record a further route - it will not record in a loop. We suggest setting
the sensor according to your driving style and road conditions. You can
also disable the option completely, in which case each oldest file will be
overwritten and the card will not need to be formatted periodically. After
adjusting the function, remember to format the memory card.
4. The camera turns on and off
Check: PARKING MODE/MONITOR and MOVEMENT DETECTION -
function designed to operate while the vehicle is parked. Deactivate
the functions, before setting off, as they can cause the camera to switch
on and off and make random fragments of the route recordings. If the
functions are deactivated, check if the fault occurs without a memory
card inserted.
5. The camera records fragments of the route / random ongoing
recordings
Check: MOVEMENT DETECTION - a function designed to operate while
the vehicle is parked.
You need to deactivate the function before you set off, as it can cause
the camera to switch on and off and make random fragments of route re-
cordings. If the function is deactivated, check if the fault occurs without
a memory card inserted.
The device shows the message "card full" or does not read the card
Check the "G-sensor" and "parking mode" functions and set them to
minimum. The card must be formatted in the computer in the FAT32 or
exFAT file system (depending on the card) and then in the recorder.
Also check: Is the selected card capacity and specification (micro SD,
class 10 - U1, V10 additionally recommended) suitable for your device
(we recommend using cards from reputable manufacturers, we recom-
mend: Kingston, Samsung, Sandisk). If you encounter an error at any
stage, replace the card with a new one from official distributors.
6. The device records noise, distorted, unclear sound
The device has a highly sensitive microphone that records any ambient
16