Setting Functions - Xblitz Igo Bedienungsanleitung

cigarette lighter socket and when the car is started, and switches
off when the car loses power after the engine is switched off. (It is
also possible to connect and power up using the constant power kit
directly from the battery).
3. Connecting to an app: the software (RoadVideo) is used to control
the operation of the device. The app can be downloaded from the
Play Store (Android), App Store (iOS) or by scanning the QR code on
the box. Make sure the camera is switched on, launch the app, search
for a Wi-Fi network on your phone, the device's Wi-Fi network name
is: Xblitz iGO and the default password is 12345678 Once the device
has successfully connected to the app, an icon will appear on the
camera display to symbolise the connection. Please note that only
one device can be connected to the network, and also when using
the app, viewing on the display is not possible. All device settings are
accessible from the RoadVideo application.
4. Recording: connect the video recorder to the application as per step
3. The recorder is in recording mode by default if there is voltage in
the power socket and a formatted memory card has been inserted.
The image is recorded if a flashing red recording dot appears on the
camera display. The recording files are saved on the micro SD card.
5. Camera: once connected to the app, to take a photo press the button
with the camera icon.
6. Reading out GPS data: when you insert the memory card with the
video files into your computer, the card will contain an installation file
with the "HIT GPS PLAYER" programme. Once it has been installed,
the video files and the route can be viewed and analysed together
with the GPS data. The data and route can also be tracked directly in
the RoadVideo application by playing the recordings on your phone,
where the parameters of the route will be displayed.

06. SETTING FUNCTIONS

Viewing and deleting files: maintain the connection between your device
and mobile phone. If you want to view saved video or photo files, click on
the 'Camera files' icon in the mobile app and manage your footage.
To manage your video recorder settings, go to the app's home screen and
click on the "Camera Settings" icon in the bottom right corner. (The list
of available functions or their description may vary slightly depending on
the iOS/Android mobile phone operating system).
1. Audio recording: on/off.
2. Volume: mute/low/medium/high.
3. Start-up sound: on/off.
14