Ruris RTX800 Bedienungsanleitung Seite 29

EN
2. Remove the top guard then remove the back guard.
3. Replace the drive belt. Turn the pretensioner (B) to position
"1" to tension the drive belt.
4. Install the belt guards and tighten the nuts (A). Move the blade
guard (E) up and down 3-5 times, then tighten the nuts (A).
Power system
Check the fuel cap and its seal.
Check the fuel hose. Replace it when damaged.
The fuel filter is located inside the fuel tank. The filter cannot be cleaned, it must be replaced with a new
filter when it is clogged. The filter must be changed once a year.
Air filter
Loosen the screws. Remove the air filter cover.
Check the filter and replace it if necessary.
Water cooling system
Check the nozzles on the disc guard and the water filter and clean them if necessary.
13