Technical Data; Overview Of The Machine; Instructions For Use - Ruris Rtx800 Bedienungsanleitung

EN
• Store the product when not in use. Store it in a dry and safe place. Make sure the cutter is in good working
order before storage and before reuse.
• Use only accessories recommended by the manufacturer. Never use an accessory with lower technical
specifications than the cutter.
• Do not use the cutter if the guards and safety devices are defective or not fitted.
• If you hit a foreign object, stop the engine and carefully check the machine for damage. If it is damaged,
restart it and use it only after it has been repaired.
• In case of abnormal vibration, stop the engine immediately to find the cause.
• Stop the engine when leaving the machine, before refueling, and when servicing, adjusting or inspecting
the cutter.
• Before cleaning, repairing or inspecting the cutter, the engine must be stopped and you must ensure that
all moving parts have stopped.
• Do not start the engine in enclosed spaces where dangerous carbon monoxide fumes can accumulate.
• Store in a place out of the reach of children and pets.
Motor
Duty cycle
Cilindrical capacity
Engine power
Engine RPM
Combustible
Tank capacity
Fuel mixture
Maximum cutting depth
Cutting disc diameter
Cutting disc speed
Net weight with accessories
Handle vibrations
1. Cutting Disc
2. Front handle
3 Starter handle
4. Throttle lock
5. Throttle lever
6. Decompression valve
7. Priming pump
8. Fuel tank cap
9. Water hose
10. Shock lever
4

3. TECHNICAL DATA

4. OVERVIEW OF THE MACHINE

5. INSTRUCTIONS FOR USE

General Engine
2 stroke
74 cc
5 hp
Maximum 8500 RPM
Fuel mixture
1000 ml
25 ml of oil/ liter of gasoline
125 mm
350 mm
4800 r/min
11.8 kg
2
9,822 m/s , K=1.5 m/s
2