Werbung
Verfügbare Sprachen
Verfügbare Sprachen
USING YOUR PEDESTAL FAN (CONT.)
3. Optionally, tap
the fan speed while in ECO Mode. The
fan will then operate according to the
following logic:
a. If the temperature increases 1°C,
the fan speed will increase one
level.
b. If the temperature decreases 1°C,
the fan speed will decrease one
level.
Sleep Mode
Sleep Mode is optomised to take into
account the stages before you sleep, during
sleep, and as you wake up.
1.
Tap
and select Sleep Mode.
will show on the display.
a. After 5 seconds, the display will
turn off and selection sounds will
be disabled.
b.
When you select Sleep Mode, the
starting fan speed is based off
your current fan speed.
2. After 1 hour, the fan speed will decrease
as the room temperature stabilises.
a. If the temperature increases 1°C,
the fan speed will increase one
level.
b. If the temperature decreases 1°C,
the fan speed will decrease one
level.
3. Tap
to turn Sleep Mode off.
to manually adjust
and
A D J U S T I N G
O S C I L L AT I O N A N G L E
Left/Right Oscillation
1.
Press and hold
will flash.
2. Tap
to cycle between 90°, 30°, and
60° oscillation angles.
3. After 5 seconds of no operation, the new
oscilation angle is automatically set.
Up/Down Oscillation
1.
Press and hold
for 3 seconds and
will flash.
2. Tap
to cycle between 120° (displayed
as 99°), 30°, 60°, and 90° oscillation
angles.
3. After 5 seconds of of no operation, the
new oscilation angle is automatically set.
Sound & Display Off
1.
Press and hold
(or press
on the remote) to turn
selection sounds and the display off.
2. After 5 seconds of no operation, the
display will automatically turn off and
selection sounds will be disabled.
3. Tap any button to temporarily turn the
display back on. If you don't tap another
button, the display will turn back off after
5 seconds.
4. Press and hold
(or press
on the remote) to turn
selection sounds and the display back on.
for 3 seconds and
for 3 seconds
for 3 seconds
EN
11
Werbung
