Alarm Setting; Snooze Function; Display Change; Clima Indicator - National Geographic Va Colour Rc Bedienungsanleitung

5. Sequence of the settings: Hours > minutes > year > day/month, month/day > month > day > air
pressure unit > Daylight saving time (DST) on/off > time offset (+/- 12 hours) > exit
6. Finally, press the SET button to save the settings and exit settings mode.

13 Alarm setting

1. Press the ALARM button to display the alarm time.
2. Press the ALARM button for approx. 2 seconds to enter the alarm time settings mode.
3. Digits to be set are flashing.
4. Press UP or DOWN button to change the value.
5. Press the ALARM button to confirm the entry and move to the next setting.
6. Sequence of the settings: Hours > minutes
7. Finally, press the ALARM button to save the settings and exit the setting mode.
8. In normal display mode, press the ALARM button to display the currently set alarm time.
9. While the alarm is displayed, press the ALARM button to enable or disable the alarm.

14 Snooze function

1. When the alarm sounds, press the SNOOZE/LIGHT button to activate the snooze function. The
alarm sounds again after 5 minutes.
2. When the alarm sounds, press any other key to stop the alarm until the set alarm time is reached
again.
3. If no key is pressed, the alarm is automatically switched off after 2 minutes.

15 Display change

• In normal display mode, press the DOWN button to toggle the time display between 12-hour or 24-
hour mode.
• In normal display mode, press the SET button to switch between time and date.
• In normal display mode, press the UP button to toggle between °C and °F when displaying the
temperature unit.
• In normal display mode, press the CHANNEL button for about 3 seconds to clear the outdoor
sensor data and reinitialize sensor reception.
• In normal display mode, press the MEM button several times to display the set Max/Min values
one after another.
• During the Max/Min display, press the MEM button for about 3 seconds to clear the Max/Min data.
Every day at 0:00 a.m. the max/min data record is automatically deleted.
• In normal display mode, press the ALARM button to display the currently set alarm time.

16 Clima indicator

1 DRY: dry (humidity <40%)
3 WET: Humid (humidity >70%)
24 / 56
2 COMFORT: Optimal (humidity between 40%
and 70%)