Beatbot AquaSense Pro Bedienungsanleitung Seite 11

7.2 Installation of Clarifying Agent Kit (Sold Seperately)
Open the top cover of the robot (
Take out the clarifying agent kit and remove the cap (
Tear off the aluminum film on the interface of the kit (
Install the kit onto the robot with the interface facing downwards and press it until
you hear a "click". Then, put on the back cover (
1
3
Tip The clarifying agent kit is not included in the product package.
).
1
1
2
).
4
2
4
9
).
).
3
EN