Beatbot AquaSense Pro Bedienungsanleitung Seite 10

7 Product Operation
7.1 Charging
Install the charge dock
Push the bracket from the bottom up into the groove on the back of the charge dock
（ ）. It is properly installed when you hear a "click"（
1
Connect the power supply
Plug into the power source （
Charge the robot
Place the robot on the charge dock（
shows a breathing light（
1 1
EN
3 3
Tips
）, it means the robot is charging.
5
4 4
Before using the robot, please make sure it is sufficiently powered.
The charging temperature is 0℃ ~ 40℃ /32~104°F. While charging, it is recommended
to keep the robot within the Wi-Fi coverage area and away from moisture and
direct sunlight.
）.
3
）. When the panel indicator on the robot
4
2 2
8
）.
2
5 5