Beatbot AquaSense Pro Bedienungsanleitung Seite 13

7.4 During Cleaning
* The robotic pool cleaner will automatically disconnect from the phone after
entering the water.
Cleaning Path:
Floor
Tips
After the cleaning cycle is completed, pull out the robot gently. Then, the relevant
cleaning data will be synchronized once the APP automatically connects (the robot
must be within the Wi-Fi coverage area).
When the robotic pool cleaner does not have enough power to complete this clean-
ing task, it will automatically climb the wall and stop on the surface next to the wall,
and the panel indicator on the robot will show solid orange.
To ensure the robot's cleaning performance and lifespan, do not take out the filter
basket during cleaning.
7.5 After Cleaning
After the cleaning task is completed, the robotic pool cleaner will automatically
moor at the edge of the pool (
Pull the robot out of the swimming pool gently (
Clean the filter basket
Open the top cover of the robot (
and inner baskets (
1
Wall
4
2
1
3
).
1
), take out the filter basket (
3
). Rinse the baskets and re-assemble it into the robot (
5
).
2
2
11
Surface
), separate the outer
4
).
6
EN