Pattfield Ergo Tools PE-RB 400 Originalbetriebsanleitung Seite 132

have become trapped in the housing.
•
Remove sludge from the shaft bottom and clean the shaft walls
every 3 months.
•
Use clear water to remove deposits from the floating switch.
8.1 Cleaning the fi lter (Figs. 6 and 7)
In order to protect the equipment and the impeller from severe soi-
ling, an additional fi lter has been installed in the bottom intake cage.
Please proceed as follows when cleaning the fi lter:
1. Open the fi lter cover (A) in the intake cage (3).
2. Remove the fi lter (B) and wash it out under running water.
3. Assemble in reverse order.
8.2 Maintenance
There are no parts inside the equipment which require additional
maintenance.
8.3 Ordering replacement parts:
Please quote the following data when ordering replacement parts:
•
Type of machine
GB
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
Current prices and information are available on request at your Horn-
bach store.
Anl_PE_RB_400_SPK7.indb 132 Anl_PE_RB_400_SPK7.indb 132
- 132 -
06.03.2025 08:34:12 06.03.2025 08:34:12