Seite 1
Gebrauchsanweisung 3 Instructions for Use 11 Dräger Oxy 3000 Dräger Oxy 6000...
Seite 3
Hinweis auf eine potenzielle Gefahrensituation. Wenn diese nicht vermieden wird, können Verletzungen oder Schädigungen am Produkt oder der Umwelt eintreten. Kann auch als Warnung vor unsachgemäßem Ge- brauch verwendet werden. HINWEIS Zusätzliche Information zum Einsatz des Produkts. Dräger Oxy 3000/6000...
Seite 4
Sauerstoffquelle ist Kaliumhyperoxid (KO die Passform muss richtig sein, damit z. B. einwandfreier Das Dräger Oxy 3000 hat eine nominelle Haltezeit von Dichtsitz gewährleistet ist, 30 Minuten. Das Dräger Oxy 6000 hat eine nominelle Haltezeit die Persönliche Schutzausrüstung muss mit jeder anderen von 60 Minuten.
Seite 5
Prüfen, ob das Gehäuse geschlossen ist. Prüfen, ob der Öffner verriegelt und unbeschädigt ist. Der Schnapphaken muss eingerastet sein. Prüfen, ob der Tragring eng am Gehäuseunterteil anliegt. Prüfen, ob die Dichtlinie unbeschädigt ist. 1 nicht Bestandteil der EG-Baumusterprüfung Dräger Oxy 3000/6000...
Seite 6
1 bis 2 Minuten in den Atembeutel. Der Atembeutel füllt sich jedoch nicht komplett. Das Entfalten des Atembeutels ggf. mit den Händen unterstützen. 12. Wenn sich der Atembeutel nicht füllt, 2 bis 3 Mal kräftig aus der Umgebungsluft in das Gerät ausatmen. Dräger Oxy 3000/6000...
Seite 7
Tragring ziehen. Gerät darf nicht zu hoch sitzen, aber auch nicht am 2. Tragring montieren. Mundstück ziehen. 16. Ggf. Schutzbrille von dem Gerät und der Knöpflasche lösen und aufsetzen. 17. Brustband um den Körper legen und schließen. Dräger Oxy 3000/6000...
Seite 8
Den Sauerstoffselbstretter in einem Kunststoffbeutel luft- Ggf. Sondervorschriften der beauftragten Verkehrsträger be- dicht verpacken und in eine zugelassene Verpackung achten. (z. B. Dräger Transportverpackung Dräger Oxy 3000: 63 05 202, Dräger Oxy 6000: 63 06 202) verpacken. Lagerung Sauerstoffselbstretter gemäß Transportvorschriften an fol- ...
Seite 9
- im Fluchtfall -5 °C ... +70 °C im Einsatz Temperatur der Einatemluft max. 60 °C (trockene Atemluft) 1,8 kg Dräger Oxy 3000 Standard relative Feuchte bis 100 % 2,5 kg Dräger Oxy 6000 Standard Umgebungsdruck 700 bis 1300 hPa...
Seite 11
Indicates a potentially hazardous situation. if not avoided, could result in physical injury or, damage to the product or environment. It may also be used to alert against unsafe practices. NOTICE Indicates additional information on how to use the product. Dräger Oxy 3000/6000...
Seite 12
It is not permitted to use punch numbers for the inscription. Dräger recommends engraving or etching. The Dräger Oxy 3000/6000 is an oxygen self-rescuer with a to- Before first use, ensure the following steps are taken: and-fro breathing system. It is independent of the ambient air.
Seite 13
cover of the casing. Check that the seal is not damaged. Inspect the casing for deformations (see supplementary sheet). Ensure that the casing does not have any tears or holes. 1 not CE-approved. Dräger Oxy 3000/6000...
Seite 14
If necessary, use your hands to help unfold the breathing bag. 12. If the breathing bag does not fill, breathe out powerfully 2 or 3 times from the ambient air into the device. Dräger Oxy 3000/6000...
Seite 15
16. If necessary, release the goggles from the device and from the button strap and put them on. 17. Put the chest strap around your body and close it. 18. Tighten the chest strap. 19. Put the helmet on, if required. Dräger Oxy 3000/6000...
Seite 16
Please note any special regulations for shipping by airfreight. pouch, then place the pouch in an approved package (e.g. Dräger Transport Package Dräger Oxy 3000): 63 05 202, Storage Dräger Oxy 6000: 63 06 202). Send the oxygen self-rescuer in accordance with transport Store the oxygen self-rescuer in a cool, dry location.
Seite 17
+70 °C) during use - during an escape -5 °C ... +70 °C 1.8 kg Temperature of the inhalation air Dräger Oxy 3000 Standard max. 60 °C (dry, breathable air) 2.5 kg Dräger Oxy 6000 Standard Relative humidity...
Seite 18
63 06 200 Dräger Oxy 6000 (worn on shoulder, with abrasion protection) Dräger Oxy 6000 Kit 63 06 000 Dräger Oxy 3000 training device 63 07 300 Dräger Oxy 6000 training device 63 07 100 Inspection window 63 05 122...