Frequently Asked Questions - Dell Precision 350 Installierung Und Schnellreferenzhandbuch

Light Pattern
YGGG
GGGG
How Do I...
Set up my computer to use two
monitors?
26
Setup and Quick Re ference Guide
Problem Description
A possible USB failure has
occurred.
The computer is in a
normal operating
condition after POST.
If a computer problem occurs that you are unable to resolve through the
steps in this section or the procedures in "Finding Solutions" in your User's
Guide, complete the following steps before you contact Dell:
Write a detailed description of the error, beep code, or diagnostic light
1
problem.
Record your Express Service Code and Service Tag Number.
2
Contact Dell from the same location as your computer.
3

Frequently Asked Questions

Solution
If your computer has the required
graphics card to support dual-
monitor setup, then look in your
box for a Y-cable. The cable has a
single connector on one end (plug
this connector into the back panel)
and branches into two connectors
(plug these connectors into the
monitor cables). See "Connecting
Dual Monitors" on page 12.
Suggested Resolution
Resinstall all USB devices, check cable connections, and
then restart the computer.
None.
Where to Find Additional
Information