CANGAROO ACE R1 Bedienungsanleitung Seite 15

FIGURE PD.2 – List of main parts: 1. Frame/Chassis; 2. Front wheels; 3. Rear wheels; 4.
Safety board.
1.UNFOLDING OF THE STROLLER FRAME – FIGURES 1-2: Push the folding button and pull
the handle up until the frame reaches the end position. You should hear a click when the
frame locks.
2. INSTALLING AND REMOVING THE FRONT WHEELS – FIGURES 3-5:
•
Installing the front wheels – Figure 3: Insert the front wheel into the front frame
hole, as shown in Figure 4. Fix it until you hear a "click".
•
Orientation of the front wheels – Figure 4: Press the lever downwards to activate
the straight direction of front wheels. Pull the lever upwards to activate the
swiveling of front wheels.
•
Removing the front wheels – Figure 5: To remove the front wheels, press the
small metal clip and the wheels are removed easily by pulling out.
3. INSTALLING AND REMOVING THE REAR WHEELS – FIGURES 6-7: Insert the rear wheel
into the hole of the rear frame, as shown in Figure 6. Fix until you hear a click. To remove
the rear wheels, push the small metal clip and the wheels are released quickly by pulling
out (Figure 7).
4. ATTACH AND DETACH THE SAFETY BOARD – FIGURES 8-9: Insert both ends of the safety
board into the two side holes of the frame. Secure the guard until you hear a click (Figure
8). To remove the guard, press the release button on both sides of the frame and pull at
the same time (Figure 9). The safety bumper has a function of pivoting, it can be opened
just one side for easier taking care of baby or putting it in or taking it out.
5.BACKREST ADJUSTMENT – FIGURE 10: Pull the adjustment belt out, as shown in figure
10 and move the seat upwardly or downward until the backrest has reached the desired
angle.
6.USING THE BRAKE ON THE REAR FRAME– FIGURE 11: To activate the parking device and
lock the two rear wheels, press down the pedal on the rear axle (Figure 7). To release the
brake, pull up the pedal using your foot.
7.5-POINT SAFETY BELT – FIGURE 12: To attach the belt, insert the two tabs of the lap belt
into the buckle on both sides, should click when properly inserted. The shoulder straps are
fitted as the metal tabs are assembled and inserted into the buckle. The sliding adjusters
are fitted and must be carefully adjusted on each side so that the belt is fastened around
your child without causing discomfort. To release the bely, press the buckle button, and
pull to open.
8. FOLDING THE STROLLER – FIGURES 13-14: Before folding the stroller, activate the
parking device and fold the canopy. Hold the fold button on the stroller frame and push
the handle forward until the stroller folds.
1. Regularly check the locking devices, brakes, safety belts and buckles, connectors, and
fixing mechanisms in order to be sure that they are in good working order and are not worn
or damaged.
INSTRUCTIONS FOR MAINTENANCE AND CLEANING
15