Kemper PROFILER Bedienungsanleitung Seite 20

20 PROFILER QUICKSTART
CONFIGURING A KEMPER KABINET
The following settings are relevant for powered as well as
unpowered Kabinets:
Press the OUTPUT button.
Use the <PAGE> buttons to navigate to the "Kemper Kone" page,
then activate "Kemper Kone" with the corresponding soft button
above the display.
Initially, the Kabinet will be in full-range mode – if you prefer, you
can use Speaker Imprint mode by activating "Monitor Cab. Off"
and selecting one of the built-in Speaker Imprints.
If you want to enjoy stereo sound, with one KEMPER Kabinet
connected to the MONITOR OUTPUT and the other connected to
the DIRECT OUTPUT, activate "Monitor Stereo".
More detailed information regarding the various options and
settings for the KEMPER Kone can be found in the Main Manual.
If you're on stage, or in a studio, you won't require a microphone to
pick up your sound, so you should connect the mixing desk to the
MAIN OUTPUT XLR outs.
TYPE
STORE
Monitor Stereo
Kemper Kone
OUTPUT Section [Page 8/8]
UNDO REDO Kemper Kone
0.0 -12.0dB
Sweetening Monitor Volume
N
TYPE
STORE
Kemper Kone Monitor Stereo
OUTPUT Section [Page 8/8]
Kemper Kone
UNDO REDO
0.0 -12.0dB
Sweetening Monitor Volume
N
LEFT RIGHT
K USB
BROWSE
EXIT
Monitor Cab O Bass Boost
PAGE
Celestion Vintage 30 5.0
Imprint Select Directivity
BROWSE
EXIT
Monitor Cab O Bass Boost
Celestion Vintage 30 PAGE
Celestion Vintage 30 5.0
Imprint Select Directivity
MAIN OUTPUT
LEFT RIGHT
GROUND
LIFT
POWER
VO
VO