Kemper PROFILER Bedienungsanleitung Seite 13

To assign one of the effect modules to an Effect Button
» Press and hold the button of the relevant effect module on
your PROFILER.
» Press the Effect Button on your Remote.
» Release both buttons.
These Effect Button assignments are specific to each Rig, so you
must store the Rig to keep the changes you have made.
Note: The above process can also be used to remove an
assignment.
TUNER
You can check the tuning of your guitar at any time by watching
the three TUNER LEDs, either on the PROFILER or the Remote.
Switch the chicken head knob to the TUNER position or press the
TUNER button on your Remote to activate Tuner Mode. Enable
"Mute Signal" via the corresponding soft button if you prefer the
guitar input to be muted whenever Tuner Mode is activated.
PROFILER QUICKSTART 13