Functional Description; Initial Operation; Mounting - MC Crypt TL-1500 Bedienungsanleitung

Safety instructions
• Do not leave packing material unattended. These may become dangerous playing material for children.
• On industrial sites the accident prevention regulations of the association of the industrial workers' society for
electrical equipment and utilities must be followed.
• If you are not sure about the correct connection or if questions arise which are not covered by the operating
instructions, please do not hesitate to contact our technical support or another specialist.

Functional Description

This powerful flash stroboscope generated extremely bright flashes controlled by the internal controller or an external
DMX controller (not part of the delivery).
The brightness and speed can be adjusted via the DMX controller.
The DMX output serves to loop the DMX signal to other DMX-controlled devices.
An installed sound-to-light control also allows you to operate the device without a connected DMX controller.

Initial operation

Carefully read the complete operating manual and the safety instructions before using the
product in order to ensure proper commissioning.
Check the device for damage before using it for the first time. If the device is damaged, do not
operate it and consult an expert or our service team.
Smoke and odor may occur when commissioning the device for the first time. This is not a malfunction.

Mounting

The assembly and the installation of the device must be carried out by a specialist who is
familiar with the hazards and the relevant regulations. Repairs, operation and maintenance of
the product may only be carried out by qualified personnel.
17