Herunterladen Inhalt Inhalt Diese Seite drucken

Steuerung K Iv Lite Steam (Deluxe); K Iv Lite Steam Control (Deluxe); Controllo K Iv Lite Steam (Deluxe) - HANSGROHE PHARO ML 29610 Serie Montageanleitung

Dampf- duschmodul
Inhaltsverzeichnis

Werbung

STEUERUNG K IV LITE STEAM
(DELUXE)
A = Lichttaste
(Licht ein / aus)
B = Display
(Anzeige von Temperatur / Dampfzeit
/ Dampfleistung / Pulszeit / Duftstoff-
zugabe)
C = + / - Wahltasten
(Einstellung Dampfzeit / Dampfleis-
tung / Pulszeit / Duftstoffzugabe)
D = Mode-Taste
(Umschalten in Programmebenen)
E = Kopfbrausentaste
(Kopfbrause an / aus)
F = Seitenbrausentaste
(Seitenbrausen an / aus)
G = Hydromassagetaste
(Hydromassage an / aus)
H = Handbrausentaste
(Handbrause an / aus)
I
= Dampftaste
(Dampffunktion an / aus)
Die Steuerung K IV Lite Steam wird im
Folgenden als Vollversion beschrieben.
Ist Ihr Produkt
- nicht an eine externe Beleuchtung
angeschlossen,
- nicht mit der automatischen Duft-
stoffdossierung ausgestattet,
so entfallen die dazugehörigen Funkti-
onen an Ihrer Steuerung!
1. Displayanzeige bei Inbetriebnahme
Wird die Anlage mit Strom versorgt,
erscheint im Display eine Zahlen-
kombination. Dahinter verbirgt sich
der Softwarestand. Nach kurzer Zeit
erlischt die LCD-Hinterleuchtung und
im Display erscheint ein blinkender
Punkt.
2. Displayanzeige bei Zustand „Sleep"
Im Display erscheint ein blinkender
Punkt, d. h., die Anlage befindet
sich jetzt im Zustand „Sleep" (AUS).
Tastenbeleuchtung,
leuchtung und die gesamte Anlage
sind abgeschaltet. Das Gerät kann
jetzt durch Betätigung irgend einer
Taste wieder in den Zustand „Stand-
by" (Bereitschaft) gebracht werden.
Nach einem Dusch- bzw. Dampf-
vorgang und ausgeschaltetem Licht
dauert es ca. 15 min bis der Zustand
„Sleep" (AUS) erreicht ist.
3. Reset der Parameterwerte
Durch gleichzeitiges Drücken der
Lichttaste A und der Seitenbrausen-
taste F > 5 sec wird die Steuerung
zurück auf die Werkseinstellungen
gestellt. Alle Tasten sind nicht mehr
hinterleuchtet und im Display er-
scheint rES, danach einmal die Licht-
taste A drücken zum Speichern.
Werkseinstellungen:
Intervall Hydromassage = 5 sec
Dampfzeit = 30 min
Dampfleistung = 70 %
Duftstoffzugabe = 70 %
52
K IV LITE STEAM CONTROL
(DELUXE)
A = light push-button
(Light on / off)
B = display
(Display of temperature / steam peri-
od / steam performance / pulse time
/ essential oil addition)
C = + / - selector switches
(Setting of steam period / steam
performance / pulse time / essential
oil addition)
D = Mode button
(Switching over to program levels)
E = overhead shower push-button
(Overhead shower on / off)
F = body shower push-button
(Body showers on / off)
G = hydromassage push-button
(Hydromassage on / off)
H = hand shower push-button
(Hand shower on / off)
I
= steam push-button
(Steam function on / off)
The following instruction of the K IV Lite
Steam Control describes the full version.
If your product
- was not connected to a external
lighting,
- was not equipped with the auto-
matical essential oil addition,
thus functions are dropped at your
control!
1. Display when putting into operati-
on
A number combination appears on
the display when the power is swit-
ched on. This is the software version.
After a short time, the LCD backligh-
ting disappears and a flashing dot is
shown on the display.
2. Display in "Sleep" mode
A flashing dot is shown on the dis-
play, i.e. the equipment is now in
Displaybe-
"Sleep" mode (OFF). Button lights,
display lights and the whole system
are switched off. Pressing any but-
ton returns the system to "stand-by"
mode (ready for use). "Sleep" mode
(OFF) is switched to about 15 minu-
tes after finishing showering or using
steam and switching off the light.
3. Reset parameter values
Press light push-button A and body
shower push-button F simultane-
ously > 5 seconds to reset to factory
settings. All buttons are no longer
backlit and rES is shown on the dis-
play, now press light push-button A
once to save these settings.
Factory settings:
Interval hydromassage = 5 sec
Steam period = 30 min
Steam performance = 70%
Essentila oil addition = 70 %
CONTROLLO K IV LITE STEAM
(DELUXE)
A = pulsante per l'illuminazione
(illuminazione acceso / spento)
B = display
(visualizzazione della temperatura / tem-
po di vaporizzazione / prestazione vapore
/ tempo impulso / aggiunta dell'essenza
aromatica)
C = + / - Pulsante di selezione
(impostazione tempo di vaporizzazione
/
tempo di vaporizzazione / prestazione
vapore / tempo impulso / aggiunta
dell'essenza aromatica)
D = pulsante Mode
(commutare nei diversi livelli di
programma)
E = tasto soffione doccia centrale
(soffione doccia centrale acceso / spento)
F = tasto doccia laterale
(docce laterali acceso / spento)
G = tasto idromassaggio
(idromassaggio acceso / spento)
H = tasto doccetta a mano
(doccetta a mano acceso / spento)
I = tasto vapore
(funzione vapore acceso / spento)
L'unità di controllo K IV Lite Steam viene
descritta qui di seguito, come versione
completa. Se il Vostro prodotto
- non è collegato ad un'illuminazione
esterna,
- non dispone di un dosaggio automatico
di sostanza aromatica,
vengono a mancare le rispettive funzioni alla
Vostra unità di comando!
1. Visualizzazione display in caso di messa in
esercizio
Alimentando l'impianto con la cor-
rente elettrica sul display appare una
combinazione di cifre che indicano la
versione di software disponibile. Dopo
alcuni istanti si spegne l'illuminazione di
fondo LCD e sul display appare un punto
intermittente.
2. Visualizzazione display in caso di stato
"Sleep"
Sul display di visualizzazione appare un
punto ad intermittenza, questo indica
che, l'impianto si trova adesso allo stato
"Sleep" (OFF). L'illuminazione tasti ed il
completo impianto sono spenti. Premendo
un tasto qualunque, l'apparecchiatura può
essere messa di nuovo allo stato "Stand-by"
(stato di pronto). Dopo una doccia oppure
dopo un bagno di vapore ed illuminazione
spenta, ci vuole ca. 15 h fino a quando si
raggiunge lo stato "Sleep" (OFF).
3. Resettaggio dei valori di parametro
Premendo contemporaneamente il
pulsante per l'illuminazione A ed il tasto
doccia laterale F > 5 sec si rimette il sistema
operativo alle impostazioni predefinite. Il
fondo di tutti i tasti non sono più illuminati
e sul display appare rES, una volta conclu-
sa questa operazione, premere una volta
il pulsante per l'illuminazione A per salvare
in memoria.
Impostazione predefinite:
Intervallo idromassaggio = 5 sec
Tempo di vaporizzazione = 30 min
Prestazione vapore = 70 %
Aggiunta dell'essenza aromatica = 70 %

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis