Herunterladen Inhalt Inhalt Diese Seite drucken

Vorwort; Foreword; Introduzione - HANSGROHE PHARO ML 29610 Serie Montageanleitung

Dampf- duschmodul
Inhaltsverzeichnis

Werbung

VORWORT

Die vorliegende Anleitung ist für den In-
stallateur gedacht, sie beschreibt die für
einen korrekten Einbau anzuwendenden
Systeme und Methoden.
Die Module entsprechen den Richtlini-
en und weissen daher keine Gefahren
für den Benutzer auf, falls sie nach den
vom Hersteller gelieferten Anweisungen
eingebaut, benutzt und gepflegt werden
und unter der Bedingung, dass die elek-
trischen und mechanischen Teile voll
leistungstüchtig gehalten werden.
Aus diesem Grund sind die in der vorlie-
genden Anleitung verzeichneten Anwei-
sungen genauestens zu befolgen.
Die Module sind in Konformität mit den
Niederspannungsrichtlinien 73/23/
EWG, 93/68/EWG und der Norm CEI
64-8 (IEC 60364) hergestellt.
Die Schutzart ist IPX5, die Nennspan-
nung beträgt für DG 29612XXX 230V,
die Nennleistung ist 3,5 kW, und für DG
29613XXX beträgt die Nennspannung
400V die Nennleistung dort ist 4,5 KW.
Die von der Europarichtlinie für elektro-
magnetische Verträglichkeit auferlegten
Sicherheitsanforderungen (Richtlinien
89/336/EWG, 92/31/EWG, 93/68/EWG)
und die Konformität mit der letzteren
wird durch die Anwendung folgender
europäischer Normen gewährleistet:
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-11
18

FOREWORD

These instructions are intended for the
installer, they describe the systems and
methods to be used for correct instal-
lation.
The Modules complies with the regula-
tions and therefore presents no hazards
for the user, providing it is installed, used
and serviced according to the instruc-
tions provided by the manufacturer and
with the condition that the electrical and
mechanical parts are maintained fully
operational.
For this reason, the instructions contai-
ned here in are to be followed exactly.
The Modules are manufactured in con-
formity with the low voltage directives
73/23/EEC, 93/68/EEC and the CEI 64-8
(IEC 60364) standard.
The protection type is IPX5, the rated
voltage for DG (29612XXX) is 230 V,the
rated power is 3,0 kW, the rated volta-
ge for DG (29613XXX) 400V the rated
power is 4,5 kW.
The safety requirements imposed by the
European directive for electromagnetic
compatibility (directives 89/336/EEC,
92/31/EEC, 93/68/EEC) and the con-
formity with the last are ensured by the
application of the following European
standards:
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-11

INTRODUZIONE

Il seguente manuale è destinato agli
installatori, descrive sistemi e metodi
da adottare per eseguire una corretta
installazione del prodotto.
I moduli rispondendo alle direttive non
rappresenta pericoli per l'operatore se,
installata, usata, mantenuta secondo
le istruzioni fornite dal costruttore e
a condizione che le parti elettriche
e quelle meccaniche siano tenute in
perfetta efficienza.
Per questa ragione occorre attenersi
scrupolosamente alle istruzioni
indicate in questo manuale.
I moduli sono stati costruiti in conformità
con le direttive relative alla bassa tensio-
ne 73/23/CEE, 93/68/CEE ed alla norma
CEI 64-8 (IEC 60364).
Il tipo di protezione è IPX5, la tensione
nominale è 230 V (29612XXX), la potenza
nominale è 3,0 kW.
La tensione nominale e 400V (29613XXX),
la potenza nominale e 4,5 kW.
Il rispetto delle disposizioni di sicurezza
emesse dalla direttiva europea relativa
alla tollerabilità elettromagnetica (diretti-
ve 89/336/CEE, 92/31/CEE, 93/68/CEE)
e la conformità con quest'ultima viene
garantita attraverso l'applicazione delle
seguenti norme europee:
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis