Rivacold MX Betriebs- Und Wartungsanleitung Seite 19

those devices.
•
Voltage monitor
This is an electronic instrument that is installed at specific request only. It is used to cut off the power
to the machine if the voltage upstream of the unit exceeds set limits. These limits (minimum and
maximum) can be adjusted; power is supplied to the unit automatically once normal conditions have
been restored and after a delay that can be programmed into the monitor. The monitor is installed
inside the electrical panel.
• Different voltage
• Differential thermomagnetic switch
This device protects the condensing unit against overloads, short circuits and indirect contact.
Es: SXM235Z022
2 400/3/50 Hz
4 220/3/60 Hz
6 460/3/60 Hz
7 380/3/60 Hz
8 230/3/50 Hz
MX SX Pag. 19 REV. 14 11/05
UK